Add Icam Ip Camera - ICP DAS USA iCAM-MR User Manual

2-2 Add iCAM IP Camera

The steps to add iCAM are as below:
i. No: The number will be the order of the IP Cameras. The range is 1 to 4.
ii. "IP" & "Port": Input the IP address and Port of this IP Camera.
iii. Select the IP Camera's module name: For ICP DAS IP Cameras, the user could select the model
name from the dropdown list.
iv. Click to add the IP Camera to the list. After adding the IP Camera, click "Save" button to
save the changes.
iCAM-MR/ZMR Series User Manual
Note：One WISE-523x/WISE-224x controller
allows connections to max. 4 IP Cameras.
Figure2: Set up the No, IP address and Port of the IP Cameras
Figure3：Set up the Model Name of the IP Cameras
Figure4: Add the IP Cameras
ICP DAS 14