Adding A New Snmp Receiver; Deleting A Snmp Receiver - Barco Freya User Manual

14.4.3 Adding a new SNMP receiver

Location & access
Menu: Configuration > System access > SNMP
Level: Administrator, Service technician
How to add new receiver
1. While in Configuration > System access > SNMP, click Add (reference 1).
A window prompting you to enter an IP address is displayed (reference 2).
Image 14–19
2. Enter the IP address of the receiver (reference 3), then click OK (reference 4).
New receiver is now displayed in the Trap Destinations list.

14.4.4 Deleting a SNMP receiver

Location & access
Menu: Configuration > System access > SNMP
Level: Administrator, Service technician
How to delete a receiver
1. While in Configuration > System access > SNMP, click on the undesired receiver (reference 1) in the Trap
Destinations list.
The receiver is displayed in its expanded form with menu (reference 2).
2
3
Configuration - System access
1
4
R5910032 /00 Freya 273