Table of Contents
Advertisement
Overview
All test patterns available in the system are listed here. Use this page to activate or deactivate a test pattern.
2
1
6
Image 6–9
Each test pattern displayed in this menu has a Name (reference 1).
When a test pattern is activated the following are available:
•
the status of the test pattern (reference 3) turns to Active.
•
name of the test pattern is noticed on top of the list (reference 2).
•
Deactivate (reference 4) located to the right is available.
•
Icon of test pattern (reference 6) is displayed (Blink Green) in status bar.
When no test pattern is activated the following are available:
•
status of all test pattern are blank.
•
Not selected is written on the top of the list (reference 2)
•
Activate (reference 5) located to the right is available for all test pattern.
Click Off TestPattern (reference 7) located on the top right of the list allows to deactivate current test pattern
without retrieve it in the list.
Test pattern is automatically displayed on the screen when it is activated.
6.3.2 Activating a test pattern using the control menu
Location & access
Menu: Control > Projector > Test patterns
Level: Administrator, Service technician, Show manager
How to activate a test pattern
1.
While in Control > Projector > Test Patterns, scroll (reference 1) to the desired test pattern (or retrieve it
with search function in the upper bar).
3
Control - Projector
7
4
5
R5910032 /00
Freya
67
Advertisement
Table of Contents
