Table of Contents
Advertisement
The first three (GPO1, GPO2 and GPO3) are reserved by the system. You cannot manually modify their
status.
2
Image 10–5
Each GPO displayed here has a name (reference 1) and a state (reference 2).
An expand button (reference 3) is located to the right of each GPO. This button allows to show the GPO in its
expanded form and displays a contextual menu.
Following actions are available in this menu:
•
Low button (reference 4) forces the GPO to low state.
•
High button (reference 5) forces the GPO to high state.
•
Toggle button (reference 6) switches the GPO to the opposite state then returns to previous state (a single
pulse).
•
Continuous toggle button (reference 7) forces the GPO to send continuous pulses.
How to change the status
1.
Click on the Expand button (reference 3) located at the right of the GPO.
The GPO is displayed in its expanded form with menu.
2.
Click on one of the menu buttons to change the status of the GPO (references 4-7).
The Status of the GPO is changed and its new state is displayed next to the GPO in the list (reference 2).
1
4
Configuration - Projector automation
3
5
6
7
R5910032 /00
Freya
207
Advertisement
Table of Contents
