Linked Icmp (Adding, Modifying And Deleting A Slave Projector) - Barco Freya User Manual

To obtain this goal, one projector will be set as master and this master will manipulate the target CLO value of
the slave so that the lamp output will be aligned between both projectors. When the lamp output of the master
changes, then the lamp output of the slave will follow.
1
2
Image 14–24
In the Slave projectors list, each slave projector is designed by its IP address (reference 1). Both master and
slave projectors need to be on the same projector control network.
Icon (reference 2) symbolizing the connection with the slave remains crossed out until the link between the
master and the slave has been confirmed by using verify the button (reference 4).
To identify easily the slave projector, a bar code and the serial number of the targeted machine is displayed
(reference 3).
Using Directly the plus button (reference 7) to add new slave projector (Add projector as slave window is
displed). You can remove a slave projector using the trash bin icon (reference 6).
Using the Edit icon (reference 5), you can also display the Add projector as slave window to directly replace
current projector by another one in the list.
In the Master projectors list (reference 8), a list of master projectors already defined in the network is
displayed.

14.5.2 Linked ICMP (Adding, modifying and deleting a slave projector)

Location & access
Menu: Configuration > System access > Multi projectors
Level: Administrator, Service technician
How to add slave
1. While in tab linked ICMP in Configuration > System access > Multi projectors, click on Add (reference 1).
A window prompting you to enter IP address of the slave projector is displayed (reference 2).
7
3
4 5 6
8
Configuration - System access
R5910032 /00 Freya 277