Protection Against Electrostatic Discharge (Esd); Ensuring Adequate Free Space Around Analyzer For Immediate Disconnection Of Power Cable In Case Of Emergency - Keysight Technologies E4990A Installation Manual

1
Installation

Protection Against Electrostatic Discharge (ESD)

Ensuring Adequate Free Space around Analyzer for Immediate
Disconnection of Power Cable in Case of Emergency
16
Back
Sides
Set up a static- safe work- station to protect the electronic
components from the damage by the electrostatic discharge
(ESD) as shown in Figure
Figure 1 Example of the static-safe work station
As described in Disconnection from Supply Source" on
page 23, the power supply is disconnected by removing the
power cable's connector plug from either the AC outlet or
the E4990A unit. When installing the E4990A, ensure that
there is sufficient free space around the unit to permit quick
disconnection of the plug (from AC outlet or E4990A unit) in
case of emergency.
Requirements
≤ 180 mm
≤ 60mm (both right and left)
1.
Impedance Analyzer