Toro Workman HDX Auto Service Manual page 98

8. Remove flange head screws that secure transmis-
sion gear cases. Carefully separate and remove rear
gear case taking care to not damage sealing surfaces of
the gear cases (Fig. 59).
9. Note location of two (2) dowel pins (Fig. 55 item 10)
and remove pins from gear case.
10.Carefully rotate shift drum (Fig. 55 item 29) to sepa-
rate the drum from the shift fork pins. Lift shift drum from
transmission. Lift shift shaft rail (Fig. 55 item 40) with at-
tached shift forks from transmission (Fig. 60).
Drive Train
1
2
1. Rear gear case
2. Front gear case
1
1. Shift drum
2. Shift fork pins
Page 4 - 54
3
Figure 59
3. Dowel pin location (2)
3
2
Figure 60
3. Shift shaft rail
Workman HDX Auto
3