While Operating - Toro Workman HDX Auto Service Manual

While Operating

1. Sit on the operator seat when starting and operating
the vehicle.
2. When starting the engine:
A. Sit on operator's seat and engage the parking
brake.
B. Make sure that high flow hydraulics (if so
equipped) are disengaged and hand throttle lever (if
so equipped) is in OFF position.
C. Make sure that transmission lever is in the P
(park) position.
D. Make sure that hydraulic lift lever is in the neutral
position.
E. Press the brake pedal. Keep foot off accelerator
pedal.
F. Turn ignition key to START. Release key when
engine starts.
Workman HDX Auto
3. Do not run engine in a confined area without ade-
quate ventilation. Exhaust fumes are hazardous and
could possibly be deadly.
4. Do not touch engine, exhaust system components,
transmission or radiator, while engine is running or soon
after it is stopped. These areas could be hot enough to
cause burns.
5. Before getting off the seat:
A. Ensure that the machine is completely stopped.
B. Move the transmission lever to the P (Park) posi-
tion.
C. Set the parking brake.
D. Rotate the ignition switch to the OFF position and
wait for all movement to stop.
E. Remove key from ignition switch.
6. Do not park on slopes unless wheels are chocked or
blocked.
Page 1 − 3
Safety