Speed Control System - Toro Workman HDX Auto Service Manual

Speed Control System

RIGHT
FRONT
9
7
6
8
1. Primary clutch
2. Speed limiter assembly
3. CVT enclosure cover
The Workman Auto speed control system includes the
speed limiter assembly, cylinder, reservoir, speed range
lever and connecting hoses.
Disassembly (Fig. 17)
1. Park vehicle on a level surface, shut engine off, re-
move key from ignition switch and apply parking brake.
2. Move speed range lever to the transport (T) position
to remove pressure in the speed control system.
3. Remove control plate from seat base to access
speed control system components (Fig. 18):
A. Remove knobs from speed range lever and hy-
draulic lift lever.
B. Remove six (6) washer head screws that secure
control plate to seat base.
C. Lift control plate from seat base.
Drive Train
5
4
4. Speed limiter cover
5. CVT intake hose
6. Speed control hose
Page 4 − 16
2
3
Figure 17
3
4
1. Speed range lever
2. Speed range settings
1
7. Cylinder
8. Hose
9. Reservoir
Figure 18
3. Hydraulic lift lever
4. Control plate
Workman HDX Auto
1
2