Toro Workman HDX Auto Service Manual page 253

Table of Contents

Advertisement

Removal (Fig. 4)
1. Park vehicle on a level surface, shut engine off, re-
move key from ignition switch and apply parking brake.
2. Remove cap screw (item 2) and lock nut (item 3) that
secure the front driveshaft yoke to front differential input
shaft.
3. Remove four (4) flange head screws (item 4) and
lower differential plate (item 17) that secure the front dif-
ferential to the frame.
WARNING
Support driveshaft to prevent it from dropping
and causing personal injury when removing.
4. Support front differential driveshaft to prevent it from
falling.
5. Slide front differential assembly forward to allow re-
moval of front differential driveshaft.
6. Slide front differential driveshaft yokes from the front
differential input shaft and the transmission output shaft.
7. Lower rear of driveshaft and remove shaft from ve-
hicle.
Installation (Fig. 4)
1. Apply antiseize lubricant to front differential input
shaft and transmission output shaft.
2. Position front differential driveshaft to vehicle frame,
front differential assembly and transmission.
3. Rotate input shaft of front differential until the hole in
the input shaft is aligned with the hole in the differential
yoke.
Workman HDX Auto
4. Align splines in driveshaft yokes with shaft splines.
Slide driveshaft yokes onto front differential input shaft
and transmission output shaft.
5. Move the front differential rearward so that the differ-
ential mounting holes align with the upper mount plate
(item 9) and the mounts (item 8) in the frame supports.
6. Insert cap screw (item 2) through driveshaft yoke
and front differential input shaft. Install and tighten lock
nut (item 3) to secure front driveshaft yoke to front differ-
ential input shaft.
7. Secure the front differential to the frame supports
with lower mount plate (item 9) and four (4) flange head
screws (item 7).
8. Lubricate front differential driveshaft grease fittings.
1. Driveshaft flange yoke
Page 8 − 9
1
2
Figure 5
2. Differential assembly
Four Wheel Drive (Optional Kit)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

07390

Table of Contents