Toro Workman HDX Auto Service Manual page 27

Removal (Fig. 6)
1. Park vehicle on a level surface and engage parking
brake.
2. Raise or remove the cargo bed or other attach-
ment(s). If bed is raised, place safety support on lift cylin-
der.
3. Make sure that the engine is stopped and the key is
removed from ignition switch. Allow engine to cool.
4. Remove air cleaner components as needed using
Figures 6 and 7 as guides.
Installation (Fig. 6)
IMPORTANT: Any leaks in the air filter system will
cause serious engine damage. Make sure daily that
all air cleaner components are in good condition
and are properly secured during assembly of air
cleaner system.
1. Assemble air cleaner system using Figures 6 and 7
as guides. The air inlet hood (item 5 in Fig. 6) should be
positioned straight upward. The vacuator valve on the
air cleaner assembly should be positioned downward.
2. Lower or install cargo bed or attachment(s).
Workman HDX Auto
1
6
5
1. Plug
2. Upper housing
3. Element
4. Gasket
Page 3 − 7
3
4
7
Figure 7
5. Lower housing
6. Elbow
7. Vacuator valve
Kohler Gasoline Engine
2