1.3.3. Return from a Low Power Consumption mode
1.3.3.1. The release source of a Low Power Consumption mode
Interrupt, Non-Maskable Interrupt, and reset can perform return from a Low Power Consumption mode. The
standby release source which can be used is decided by a Low Power Consumption mode.
It shows the following table about details.
Interrupt
Release
Source
SysTick interrupt
Non-Maskable Interrupt (INTWDT0)
Non-Maskable Interrupt (INTLVD)
Reset (SIWDT)
Reset (LVD)
Reset (OFD)
Reset (RESET_N pin)
: After release, the interrupt procedure will start.
-: It cannot be used for release.
Note: INT00 to INT18, INT21 (External Interrupt 00 to 18, 21) can select one of falling edge, rising
edge and level. For details, please refer to the reference manual "Exception".
Table 1.11 Release source list
Low Power Consumption mode
INT00 to INT18, INT21 (Note)
INTVCN0, INTVCT0
INTEMGx, INTOVVx, INTPWMx
INTENCx0, INTENCx1
INTADxPDA, INTADxPDB, INTADxCP0, INTADxCP1,
INTADxTRG, INTADxSGL, INTADxCNT
INTSCxRX, INTSCxTX, INTSCxERR
INTI2CxNST, INTI2CxATX, INTI2CxBRX, INTI2CxNA
INTT32AxAC, INTT32AxACCAP0, INTT32AxACCAP1,
INTT32AxB, INTT32AxBCAP0, INTT32AxBCAP1
INTPARIx
INTDMAATC,INTDMAAERR
INTFLCRDY
INTFLDRDY
27 / 64
TMPM4K Group(2)
Clock Control and Operation Mode
IDLE
STOP1
TXZ+ Family
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2021-06-15
Rev. 1.1