For Installer: Mounting Via Connect - Kramer VIA Connect PRO User Manual

For Installer: Mounting VIA
Connect
This section provides instructions for mounting
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount
VIA Connect
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
You can install VIA Connect using one of the following method:
▪
Install the mounting plate on a wall with the 4 screws, insert the 2 hand-tightened screws into
the bottom of the device, and mount the device on the mounting plate using the 2 screws.
▪
Place the device on a flat surface.
▪
Place the device on a flat surface.
VIA Connect – For Installer: Mounting VIA Connect
VIA
before connecting any cables or power.
Connect. Before installing, verify that the
Kramer Electronics Ltd.
7