Kramer VIA Connect PRO User Manual page 16

Configuring VIA Pad Settings
VIA Connect enables you to configure
operates when paired with your
To configure VIA Pad settings:
1. Click Device Management > VIAPad Configuration on the navigation pane.
The VIAPad Configuration page appears.
2. Select the following as required:
▪ Guest – Participant can Present by touching the VIA Pad device; the
app dashboard is not available.
VIA Pad overrides Room Code – Participant can join a meeting without entering the
▪
room code.
Room Name is automatically populated; it reflects the name of your
3. Select the Auto Connect to Wi-Fi checkbox, to configure
connect to the meeting space Wi-Fi network.
The Auto Connect settings appear.
4. Define the following for the meeting space Wi-Fi network:
a. SSID – Name of the network
Make sure that you write it EXACTLY as defined. This parameter is case sensitive.
b. Authentication Mode – Security used by your Wi-Fi access point. Select from the pre-
set options: WEP Open, WEP Shared, WPA Personal, WPA2 Personal.
c. Encryption – Type of encryption key used by your router.
d. Key – Password required to join your network (up to 50 characters max).
VIA Pad settings are configured.
After clicking Apply Settings, the configuration is saved, there is no need to reboot your
unit.
Pairing a VIA Pad Device
Each VIA Pad device must be paired to your
meeting participant.
To pair a VIA Pad device to your VIA Connect unit:
▪
Follow the directions below:
VIA Connect – For Web Administrator: Configuring Settings – Gateway Management Pages
VIA Pad settings that define how a
VIA Connect unit.
VIA Connect
Kramer Electronics Ltd.
VIA Pad
Kramer VIA
VIA Connect
VIA Pad to automatically
unit before being used by a
device
unit.
14