Preface - Siemens SIMATIC ET 200SP CM 1xDALI Programming Manual

Preface

Purpose of the documentation
This manual describes the communication model of CM 1xDALI. It helps you access CM
1xDALI from the CPU through PROFINET or PROFIBUS. This manual supplements the
manual ET 200SP Communication module CM 1xDALI
(https://support.industry.siemens.com/cs/ww/en/view/109769428) which describes the
functions and technical specification.
The information provided in this manual and in Communication module CM 1xDALI manual
supports you commissioning the DALI system.
Conventions
● CPU: In this manual, "CPU" means the device which support PROFIBUS/PROFINET and
communicates with CM 1xDALI.
Please observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on the section of the documentation to which particular attention
should be paid.
Note
To prevent injury, read the manual before use.
The manual is delivered online, you can download the document from Central technical
support (https://support.industry.siemens.com/cs/ww/en/).
History
Edition
09/2019
ET 200SP CM 1xDALI Communication Model Description
Programming Manual, 12/2019, A5E47581955-AA
Comment
First Edition
3