3.4.9
Remove control gear from groups
Description
Command ID 29
Input Param-
eters
Response
Parameters
3.4.10
Query control gear scene
Description
Command ID 30
Input Param-
eters
Response
Parameters
ET 200SP CM 1xDALI Communication Model Description
Programming Manual, 12/2019, A5E47581955-AA
Use this CM command to remove the control gear from some groups.
Byte 0
Short address of the control gear
Byte 1
Remove from group 0 to 7.
Each bit indicates one group: for example, Bit 0 is for group 0; bit 1 is
for group 1.
1: remove from this group
•
0: no action
•
Byte 2
Remove from group 8 to15.
Each bit indicates one group: for example, Bit 0 is for group 8; bit 1 is
for group 9.
1: remove from this group
•
0: no action
•
Byte 0
Return code (Page 51)
Use this CM command to query the scene level and color of a control gear.
Byte 0
Short address of the control gear
Byte 1
Scene number
Byte 2
Query actual device flag.
0: query the scene configuration saved in the CM 1xDALI.
•
1: query the scene configuration on the device.
•
Byte 0
Return code (Page 51)
Byte 1
0: queried the scene membership in CM 1xDALI.
•
1: queried the scene membership on the device.
•
Byte 2
Scene level
Byte 3
Show the scene color type.
16#10: color xy-coordinate
•
16#20: color temperature
•
16#00: the control gear type is not type 8 (color control)
•
Other values: scene color type is unknown.
•
CM 1xDALI command list
3.4 Configuration
39