3.3 Power
Power is via a button cell (Typ CR2032, 3V; included with
delivery).
3.5 Storage cap
If the probe has been out of the electrolyte gel for a longer per-
iod of time, it must be stored in the electrolyte gel for approx. 12
hours to regenerate.
The storage cap can also be attached to the wall / transport bracket.
3.6 Wall / Transport bracket
3.7 Replacing the storage cap
Remove the instrument from the wall / transport bracket. The stor-
age cap is simply plugged on and can be pushed off the bracket
by applying light pressure.
3.4 TopSafe
TopSafe protects the instrument from
moisture and mechanical strain (impact).
We recommend you always use TopSafe.
The IP68 protection class is achieved if
the instrument is placed inside the Top-
Safe and is closed.
The storage cap filled with electrolyte gel is
used to store the probe between measure-
ments.
The probe is only immediately ready to
operate if stored in electrolyte gel.
The wall / transport bracket with belt holder
and attachment unit for the storage cap is
used for the safe storage of the measure-
ment instrument at a fixed point or during
transport.
3. Product Description
25