•
Use a 9/64" driver to secure the clamp. There
is (2) clamps. One front and one aft.
Receiver, Gyro and Battery Installation
•
The BVM demo uses a Cortex Pro and a
Spektrum 20ch RX. The gyro is mounted in
front of the RX. The Pulse 3600 mah RX
batteries sit on the Velcro just in front of the
Gyro.
NOTE: The air bottles are under the front tray..
CCU/ Air Fill Valve
•
The CCU and Air Fill valve are mounted
under the nose cone This has been
programmed from the factory and shouldn't
need to be touched.
BVM ®2021
7
April 2021
Need help?
Do you have a question about the F-15B and is the answer not in the manual?
Questions and answers