Wheels & Brakes Preparation - BVM F-15B Assembly And Operating Manual

Wheels & Brakes Preparation
•
Remove the wheel retaining screw with a 2mm
driver. Use a small amount of Z-42 when re
installing.
NOTE: If you need to remove the O'Ring. Use a
sharpened wood stick to help remove the O-Ring. Don't
use anything metal. This will scratch the inside of the
brake hub.
•
Use a small amount of Axle Grease on the wheel
axle. (BVM#5784)
•
Use a small amount of BVM Dry Lube on the
pivot joints on your gear.(BVM1947) Also use
a small amount of Super-O-Lube on the brake
O-ring. (BVM5779) This will help the brakes
work smoothly.
BVM ®2021 9 April 2021