Required Tools; Accessories Used To Complete Prototype - BVM F-15B Assembly And Operating Manual

Required Tools

A combination of Metric and SAE hex socket and drivers along with a small standard and Phillips
head drivers will be necessary.
List of Adhesives/Lubricants/Heat Shield+
Available at BVMjets.com
BVM Aeropoxy
BVM Qt Poxy
Slo-Zap
Pacer Z-42
Super O-Lube
BVM Thin Lube for "O" Rings
Axle Super Lube
BVM Dry Lube

Accessories Used to Complete Prototype

1 x AR20310T 20-Channel PowerSafe Integrated Telemetry Receiver (SPMAR20310T)
2 x 3600mAh 2S 7.4V LiPo Receiver Battery
1 x Cortex Pro Gyro
1 x BVM T-16 Turbine
Begin assembly by removing and inspecting all airframe components. Carefully become
familiar with the wiring, landing gear, gear doors, etc. The BVM F-15 GO Fly is not meant to
be a primary turbine trainer. The manual assumes you already have experience with high
performance aircraft.
BVM ®2021
(BVM # 9566)
(# PA-SR-0042)
(# PT20)
(#PT42)
(BVM #5779)
(BVM # 1945)
(BVM # 5784)
(BVM # 1947)
4 April 2021