Site Considerations - Craftex CX Series Manual

Sometimes a second application
may be necessary in some heavily
coated areas.
4. We recommend you coat all
unpainted surfaces with a quality
metal protectant to prevent rust.
WARNING!
Avoid using gasoline and petroleum
products to clean machinery, they
have low flash points and can explode
or cause fire.
CAUTION!
Work in a well-ventilated area, some
cleaning solvents are toxic when
inhaled.
NOTICE:
Avoid harsh solvent like acetone or
brake parts cleaner that may damage
painted surfaces. Always test on a
small inconspicuous area first.

Site Considerations:

Weight Load
The surface that you place your
machine on must be able to bear the
weight of your CXR1000, accessories
that may be attached and the
heaviest workpiece that may be used.
The machine weight can be found on
the Machine Data Sheet. For the
weight of your accessories consult
their manufacturer's
manuals. Also to consider is the
weight of the operator and dynamic
loading when operating the machine.
Space Allocation
When considering the space, you
need to allocate for a safe and
effective operation you must take
into account to provide enough space
for adequate material handling or the
installation of accessories. In a
permanent installation, leave enough
space around the machine to open or
remove doors
maintenance etc.
Physical Environment
The physical environment where the
machine is operated is important for
the safe operation of any machine.
Operate the machine in a dry
environment, free from excessive
moisture, hazardous
airborne abrasives,
conditions. Extreme conditions for
this machine are those where the
ambient temperature range exceeds
5-40 degrees Celsius; the relative
humidity range exceeds 20%-95%
(non-condensing);
10
operator's
as required for
chemicals,
or extreme
or the