Testing On Hw - Xilinx ZCU102 Getting Started Quick Manual

Task 5: Testing on HW:
For ease of use, there is a script provided to test on the hw. However, users can skip to Task 6 for the
steps on how to debug using the SDK GUI.
Launch the XSDB, and source the command below:

source test_on_hw.tcl

demo <option>

stop

rst
Where Options are; led, echo, helloa53, hellor5 and bram.
Type "help" for all the options
Note: User may need to power cycle between tests.
When the "led" demo is run, you should see the LEDs highlighted below blink:
Type "stop" on the XSCT console to stop this test.
When the "echo" is run, you should see the echo server on the serial port:
Users can also test a ping:
© Copyright 2016 Xilinx