Charging Spare Batteries; Charging Temperature; Powering On The Fr6876; Calibrating The Screen - Motorola FR6876 User Manual

FR6800 User Guide
LED Charge Indicators (Continued)
Table 1-2
Charging/Battery Status LED
Single Blink Amber (when device is
turned on)
Blink Amber (Battery charger temperature
is too high.)

Charging Spare Batteries

See Chapter 6, Accessories

Charging Temperature

Charge batteries in temperatures from
FR687
6.
To accomplish this, for small periods of time, the FR6876 or accessory alternately enables and disables
battery charging to keep the battery at acceptable temperatures. The FR6876 or accessory indicates when
charging is disabled due to abnormal temperatures via its LED. See

Powering On the FR6876

Press the Power button to turn on the FR6876. If the FR6876 does not power on perform a warm boot. See
Resetting the FR6876 on page
When turning the FR6876 on for the first time, the splash screen displays for about a minute as the FR6876
initializes its flash file system, then the calibration window appears. Note that these windows also appear upon
cold boot.
NOTE When the FR6876 powers up after inserting a battery for the first time, the device boots and powers on
automatically.

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Remove the stylus from its holder on the back of the FR6876.
1.
Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
2.
Repeat as the target moves around the screen, then tap the screen to continue.
3.

Checking Battery Status

To check the charge status of the main battery or backup battery in the FR6876, tap
icon to display the
Power
To save battery power, tap the
Indication
Battery depleted.
Battery over-temperature condition.
for information on using accessories to change spare batteries.
0°C to 45°C (32°F to 113°F).
2-14.
window.
Power
tab and set the FR6876 to turn off after a specified number of minutes.
Advanced
Charging is intelligently controlled by the
Table 1-2.
17
Getting Started
> > tab >
Start Settings System