Table of Contents
Advertisement
2.5
M.2 Installation
The following instructions are provided using the PPC-3211W model for reference:
1.
Follow the procedures in Section 2.3 to open the rear cover and remove the
reinforcement plate (Figure 2.18).
2.
Plug the M.2 drive into the mainboard interface. Retrieve the two (M2.5x4)
screws from the accessory box to affix the drive in place (Figure 2.19).
3.
Replace the rear cover and reinforcement plate.
PPC-3151W/3211W User Manual
Figure 2.18
Figure 2.19
Figure 2.20 PPC-3151W Reinforcement Plate
18
Advertisement
Table of Contents
