Table of Contents
Advertisement
Description of screen
Click the "Start" button.
Click the "OK" button. (The following screen is displayed only when "Secure Reg" is checked.)
Starts scanning. (Disabled when there is no scanning target.)
The time required by scanning differs with the size of the system. Use the indicator displayed at (b)
during scanning as a guideline.
While scanning is being performed, the "Stop" button (c) is displayed. To stop scanning, click this button.
Note
All systems connected to 1 Transmission adaptor (U10 USB Network Interface) are stopped during scan-
ning for secure reg.
VRF network list display during scanning
When scan ends, "Done" is displayed at the progressive bar display.
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
(9
(a)
5
(b)
(c)
Advertisement
Table of Contents
