Description of function
The Indoor unit and Outdoor unit Status information can be viewed.
Select the VRF System ("All" or "Adaptor*") that you wish to display.
Menus for only the number of connected adaptors are displayed
Select the menu items in order of "View"→"VRF System"→"All" or "Adaptor*" from the Menu bar
Select the displayed unit (indoor unit or outdoor unit).
Select the menu items in order of "View"→"Unit"→"Indoor Unit" or "Outdoor Unit" from the Menu bar
Example) When set to "All" and "Indoor unit"
Items displayed in the Status List.
"Unit Group Name"
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Remote controller group name
Outdoor group name
Displays the type of refrigerant system
(cooling only , heat pump or heat recovery)
Connected U10 USB Network Interface adaptor name.
Displays the address for each unit. Display contents: "Refriger-
ant system address "-"Unit address"-"R.C address".
For V-II/J-II series following notations apply for the address suf-
fix to show how the units are controlled in AUTO mode;
/M Master indoor unit
/S Slave controlled by master indoor unit
/O Unit controlled by outdoor unit
Those without suffixes are units that not any of the aboves.