Download Table of Contents Print this page

Hardware Installation (Transmission Adaptor); Transmission Adaptor Installation - Fujitsu BACnet UTY-ABGX Instruction Manual

For vrf system

Advertisement

Table of Contents
5-2

Hardware Installation (Transmission Adaptor)

55555 Transmission Adaptor Installation

UTY-ABGX
®
BACnet
Gateway
USB cable
Transmission Adaptor
(U10 USB Network Interface)
®
The BACnet
Gateway can connect up to 4 VRF Systems. Since 1 Transmission Adaptor connects to
1 system, up to 4 Transmission Adaptors are connected.
Following chart shows the detail of the U10 USB Network Interface Adaptor. These adaptors are not includ-
®
ed in the BACnet
Gateway product and must be procured in advance.
Name & Shapes
Transmission Adaptor (U10 USB Network Interface
-TP/FT-10 Channel)
It is necessity that set Transmission adaptor respectively because of the S/V series and V-II/J-II series can
not be connected to the same communication line.
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Procure the necessary number
in accordance with the number
of connection systems.
(Field Supply)
14
VRF System 0
VRF System 1
VRF System 2
VRF System (
Q'ty
Model : 75010R
(Echelon
Remark
®
Corporation)

Advertisement

Table of Contents
loading

Table of Contents