Download Table of Contents Print this page

Basic Settings; When Starting For The First Time - Fujitsu BACnet UTY-ABGX Instruction Manual

For vrf system

Advertisement

Table of Contents
6.

Basic Settings

In this section, the basic settings necessary before use in the PC are explained. The settings that are also
necessary when equipment configuration changes are also explained here.
When starting the system for the first time after installation, make the settings in accordance with the flow
described below. At the 2nd and subsequent starting, make the necessary settings in accordance with sub-
sequent paragraphs, as required.
6-1

When Starting for the First Time

When starting the BACnet
®
Setting for First Time Use
6-2 "Selection of Unit Data Acquisition Method"
To perform "Adaptor Setting". ............................. (a)
To import backed up data. .................................. (b)
(b)
OK
6-3 "Login Setting"
6-4 "Initial Setting"
6-5 "Adaptor Setting"
6-6 "Unit Registration"
®
BACnet
Gateway
program ends.
Items Which Can Be Arbitrarily Set
6-7 "Description Property Setting"
6-8 "Change Password"
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Gateway for the first time, perform the settings in accordance with this flow.
(a)
OK
OK
OK
Transmission adaptor selection
Transmission Adaptor Name setting
Transmission line connection confirmation
OK
Scanning range
Device confirmation
OK
Main screen
((
Cancel
Cancel
Cancel
Cancel
Cancel
®
BACnet
Gateway program ends.
(When Cancel is selected, Setting is stopped.
Setting must be repeated from the beginning.)

Advertisement

Table of Contents
loading

Table of Contents