Fujitsu BACnet UTY-ABGX Instruction Manual page 36

Items
"IP Address"
"Subnet Mask"
"Device Instance No."
"Device Object Name"
"Max_APDU_Length_Accepted"
"APDU_Timeout (m sec)"
"Number_of_APDU_Retries"
"APDU_Segment_Timeout (m sec)"
"I-Am Service Broadcast Sending
(at 60-second intervals)"
"Unconfirmed COV Notification Service
Broadcast Sending"
"Process ID"
"Synch. VRF System Time to Time Synchro-
nization/UTCT Time Synchronization."
"Register as Foreign Device with BBMD"
"BBMD at IP Address"
"BBMD at UDP Socket"
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Contents
Enter the IP address used in BACnet
Enter the subnet mask corresponding to the IP address used in
®
BACnet communications.
Enter the Instance No. of the local Device.
Enter the object name of the local Device. (Up to 50 ASCII charac-
ters)
Select the acceptable APDU length.
Enter the APDU timeout time in milliseconds.
Select the number of retries when time out occurs.
Enter the internal time at which APDU segment is resent, in milli-
seconds.
Check when you want to send I-Am Service periodically. (60-second
intervals)
COV notification is sent by broadcast even when SubscribeCOV
service is not subscribed. Refer to the interface specifications for
the target object.
* Depending on the number of units and their status,large number
of packets are sent.
Process ID used when sending COV notification.
Check if you want to send "system time setting" to VRF units when
TimeSynchronization/UTCTimeSynchronization Service is received.
Check when you register as an external device to BBMD.
BBMD IP address.
BBMD UDP port No.
(6
®
communications. (IPv4 only)