Download Table of Contents Print this page

Model Name Setting - Fujitsu BACnet UTY-ABGX Instruction Manual

For vrf system

Advertisement

Table of Contents
7-3

"Model Name Setting"

Model Name is automatically acquired at scanning.
When the data was collected normally, Model Name is displayed at "Model Name" and "Model Name for
ECA".
When the data could not be collected normally, Model name is displayed in red. In this case, set Model
Name individually.
*
S/V Series cannot obtain Model Name even by scanning. (This function cannot be used.)
Select the menu items in order of "Setting"→"Model Name Setting" from the Menu bar.
Select "Model Name".
Click the "OK" button.
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
47

Advertisement

Table of Contents
loading

Table of Contents