Download Table of Contents Print this page

Initial Setting - Fujitsu BACnet UTY-ABGX Instruction Manual

For vrf system


Table of Contents

"Initial Setting"

Makes any settings and changes necessary before operation.
When you want to reset Initial Setting, open the "Initial Setting" screen.
Select the menu items in order of "Setting"→"Initial setting" from the Menu bar.
Input or check each item of the screen shown below.
Always set "IP Address" and "Subnet Mask".
Change other items as required.
Click the "OK" button.
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.


Table of Contents

Table of Contents