Table of Contents
Advertisement
WIBU-KEY Setup was successful.
Click the "OK" button.
If this screen is displayed, installation of the BACnet
Click the "Finish" button
After the end of installation, reboot the PC.
Click the "Yes" button.
After reboot the PC, connect the WIBU-KEY and the U10 USB Network Interface adaptor to USB port
of the PC.
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
®
Gateway for VRF System to the PC is complete.
2(
Advertisement
Table of Contents
Need help?
Do you have a question about the BACnet UTY-ABGX and is the answer not in the manual?