Table of Contents
Advertisement
ATTENTION!
Inadequate rigidity of the foundation will cause interaction of vibrations between the
milling machine and the foundation (resonant frequency of the components). If the
rigidity of the overall system is insufficient, critical speeds with annoying vibrations will
be reached very quickly and lead to bad milling results.
Fasten the machine substructure to the foundation.
Place the milling machine on the provided foundation.
WARNING!
The nature of the foundation and type of fixings used to secure the machine base to the
foundation must be capable of absorbing the loads caused by the milling machine. The
foundation must be level. Check that the milling machine foundation is horizontal by
using a spirit level.
Fix the milling machine to its foundation at the recesses provided on the machine base for
this purpose.
3.6
Fastening to the Machine Base
3.6.1
Dimensions, recesses for fastening the machine
A
GB
MH20V | MH20VL | MH20VLD
26
A
A-A
274
250
Translation of original instructions
226
220
650
Version 2.5.1 - 2020-07-28
Advertisement
Table of Contents
