Table of Contents
Advertisement
3.2
Delivery
INFORMATION
The machine is pre assembled. It is delivered in a transport box.
After the unpacking and the transportation to the installation site it is necessary to mount and
assemble the individual components of the machine.
Check the status of the machine immediately upon receipt and claim possible damages at the
last carrier also if the packing is not being damaged. In order to ensure claims towards the
freight carrier we recommend you to leave the machines, devices and packing material for the
time being in the status at which you have determined the damage or to take photos of this sta-
tus. Please inform us about any other claims within six days after receipt of delivery.
Check if all parts are firmly seated.
The machine can be raised with a lift
truck or forklift truck underneath the
packing case.
3.3
Unpacking
Install the machine close to its final position before unpacking. If the packaging shows signs of
having possibly been damaged during transport, take the appropriate precautions to prevent
the machine being damaged when unpacking. If damage is discovered, the carrier and/or ship-
per must be notified immediately so the necessary steps can be taken to register a complaint.
Examine the complete machine carefully and check whether all materials, such as shipping
documents, instructions and accessories have been delivered with the machine.
3.4
Installation and assembly
3.4.1
Installation site requirements
The power plug of the milling machine must be readily accessible.
The illumination of the workplace must be designed in such a manner that an illumination of
500 Lux is attained at the tool tip.
If this is not guaranteed with the normal installation site lighting, workplace lights must be used.
In order to achieve sufficient safety against falls by slipping, the accessible area in the mechani-
cal machining zone of the machine must be equipped with a slip resistance. The slip-resistant
mat and/or slip-resistant flooring must be at least R11 in accordance with BGR 181.
The used shoes must be suitable for being used in those machining areas. The accessible sur-
faces must be cleaned.
GB
MH20V | MH20VL | MH20VLD
24
Translation of original instructions
1.5 t
Version 2.5.1 - 2020-07-28
Advertisement
Table of Contents
