To Cancel Block Length Settings - Casio KL-7000 Owner's Manual

3. Press FORM to display the FORM menu.
4. Use K and L to highlight LENGTH, and press SET.
5. Use K and L to highlight FREE, and press SET.
• Since there are six options on this menu, they do
not all fit on a single screen. To view the two op-
tions at the bottom of the menu (FREE and CAN-
CEL), press L four times.
6. Use K and L to select B-LENGTH for the block
length setting screen, and press SET.
7. Use H to decrease the current block length setting value or J to increase it.
• Note that the tape length at the top of the display also changes when you change the
block length.
• After setting the block length (and tape length), press SET to apply the setting and return
to the text input screen.
8. After making the setting, press SET to apply it.
The imager appears as illustrated below when you are using fixed block lengths.
[ ]
( ]
]

To cancel block length settings

1. Press FORM to display the FORM menu.
2. Use K and L to highlight LENGTH, and press SET.
40
Printing can be performed as specified.
Printing can be performed using the length specifed, but characters are con-
densed horizontally.
Printing cannot be performed as specified.
The error message "TEXT DOES NOT FIT!" appears on the display.
FUNC
LENGTH
SHIFT
PITCH
CODE
VERT
FEED
MIROR
OVER
BL SPACE
CAPS
Yes SET No ESC
FUNC
VHS
SHIFT
8mm
CODE
VERT
CASSETTE
MIROR
OVER
FLOPPY
CAPS
Yes SET No ESC
FUNC
T LENGTH
SHIFT
CODE
VERT
B LENGTH
MIROR
OVER
CAPS
Yes SET No ESC
FUNC
T LENGTH
SHIFT
24 5cm
CODE
VERT
B LENGTH
MIROR
OVER
[ 5 2cm ]
CAPS
Yes SET No ESC
A
A
A
A
A
A
A
A