Casio KL-7000 Owner's Manual page 53

2. Use K and L to highlight LAYOUT, and then press
SET.
• If the message "CLEARS INPUT TEXT!" appears
on the display, press SET to clear previously input
text or ESC to abort the operation without clearing
input text.
3. Use K and L to move the highlighting to the type
of layout you want, and then press SET.
• In this example, highlight VIDEO.
4. Use K and L to highlight the type of video tape
label you want, and then press SET.
• In this example, highlight 8mm.
5. Use H and J to display the variation you want, and
then press SET.
• In this example, display 8mm (1).
• The text section that is flashing on the display is
the one that is selected for text input.
6. Input the text for the flashing section.
7. After you input text for a section, press SET to move to the next section.
8. Repeat steps 6 and 7 for each section.
• When the section for the illustration is flashing, you will note that there is already an
illustration there. Use BS or DEL to delete the illustration, and then input the new
illustration
• See page 22 for details on inputting illustrations.
• When you press SET after inputting the illustra-
tion, the display shows the following menu.
9. Use K and L to highlight the operation you want and then press SET.
• Highlight PRINT to print the label.
• Highlight STORE to store the label in memory (see "To store a preset layout label in
memory").
• Highlight EXIT to exit the label operation without storing the label you created in
memory.
52
.
FUNC
VIDEO
SHIFT
AUDIO
CODE
VERT
NAME/FIL
MIROR
OVER
MEM DATA
CAPS
Yes SET No ESC
FUNC
VHS
SHIFT
VHS C
CODE
VERT
8mm
MIROR
OVER
BETA
CAPS
Yes SET No ESC
FUNC
8mm
SHIFT
1 2
CODE
VERT
MIROR
OVER
CAPS
Yes SET No ESC
FUNC
SHIFT
8mm
CODE
VERT
MIROR
OVER
CAPS
Yes SET No ESC
FUNC
PRINT
SHIFT
STORE
CODE
VERT
NEW
MIROR
OVER
EXIT
CAPS
Yes SET No ESC
A
A
A
A
A
A A
A
A
SANS-SERIF
MANUAL FEED
6mm
A
A