Part 6 Confi Guring Form Settings - Casio KL-HD1 User Manual

Part 6 Confi guring Form Settings
You can use the procedure in this section to confi gure direction, mirror,
alignment, pitch, and tape length settings.
Confi guring Direction, Mirror, Align, and Pitch Settings
1. Input the text you want.
2. Press .
3. Use and to select the item you want to change and then press OK.
4. Use and to change the setting.
5. Press OK to return to the text input screen.
When this setting
Use
is selected:
DIRECTION • HORIZONTAL: Positions text from left to right.
• VERTICAL: Positions text from top to bottom.
MIRROR • NORMAL: Prints the tape normally.
• MIRROR: Prints the tape in mirror image onto
special optionally available iron transfer tape.
ALIGN • LEFT: Aligns text fl ush left.
• CENTER: Centers text.
• RIGHT: Aligns text fl ush right.
• EQUAL: Equally spaces text to fi ll the entire
space available.
PITCH • Specify one of the following settings for the pitch
(space between characters): "NONE" (0 mm),
"NARROW" (1 mm), or "WIDE" (2 mm). Changing
this setting also causes the tape length to change
accordingly.
• This setting cannot be changed when EQUAL is
selected for the ALIGN setting, and when FIX is
selected for the TAPE LENGTH setting.
14 EN
and to select the option you want:
Tape Length Setting
You can use either of the methods below to specify the tape length.
AUTO: Automatically adjusts tape length in accordance with the number of
characters.
FIX: Maintains a fi xed tape length in the range of 0cm (0") to 99.9cm
5
(39 / ").
16
To have tape length set automatically (AUTO)
1. Press .
2. Use and to select AUTO, and then press OK.
To specify a fi xed tape length (FIX)
1. Press .
2. Use and to select FIX.
3. Use and to specify the tape length and then press OK.
Each press of (–) or (+) changes the current length setting by 0.1.
You can also input a value for the tape length.
Note
Brackets to the left and right of the display tape length value provide the
information described below.
[xx.x cm]: Print will be the specifi ed length.
(xx.x cm]: Print will be the specifi ed length, but text will be compressed
horizontally.
xx.x cm]: Print will be longer than that specifi ed length.