Insert
With insert, characters you input are inserted between the characters at the cursor loca-
tion. The Label Printer is in the insert mode when the overwrite mode indicator is not on the
display.
Note that insert is the default whenever you switch Label Printer power on.
The following table illustrates the difference between the overwrite and insert modes.
Display Characters
ABCDEFG
To switch between overwrite and insert
1. Switch power on.
2. Press SET UP to display the setup menu.
3. The INPUT option is highlighted, so press SET.
4. Use K and L to highlight OVERRITE (overwrite) or INSERT, and then press SET to
apply the setting and return to the text input screen.
26
Input
Overwrite Mode
XYZ
ABXYZFG
Insert Mode
ABXYZCDEFG
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
Yes
SET
No
ESC
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
Yes
SET
No
ESC
A
A
A
A