Part 6 Confi Guring Form Settings - Casio MEP-K10 User Manual

Important!
Do not affi x labels to the types of surfaces listed below.
Surfaces exposed to direct sunlight or rain
Human or animal skin
Walls, utility poles, and other surfaces located on other people's property
Containers used for heating in a microwave oven
Unsuitable Surfaces (Label may not stick.)
Rough surfaces
Surfaces that are wet, oily, dusty, or covered with other matter
Special plastic materials (silicon, polypropylene, etc.)
To feed the Tape
Press and then (feed).
This will feed the tape approximately 12 mm.
Part 6 Confi guring Form Settings
Specifying the Text Orientation
Use the procedure below to select printing of either vertical or horizontal text.
Text Orientation
Vertical
Horizontal
To specify the text orientation
Press .
Each press toggles between vertical and horizontal text printing.
Specifying the Tape Length
You can specify the tape length for printing, which will also cause the length
of the printed text to change. Available settings are 100% (normal tape
length), 75%, or 50%.
Tape Length
100%
75%
50%
To specify the tape length
Press .
Each press cycles the setting in the sequence; 100% ➝ 75% ➝ 50%.
Indicator Sample
None
Indicator Sample
E-13