To Recall Data From Memory; Deleting Text - Casio KL-7000 Owner's Manual

To recall data from memory

1. Press MEMORY.
2. Use K and L to highlight RECALL, and press SET.
3. Use K and L to scroll through the text stored in memory. Use H and J to scroll the
text left and right.
4. After you find the text that you want to recall, press
SET.
• The NEW/COMBINE display appears only if you
already have input text before starting the recall
operation. If you did not input any data before start-
ing the recall operation, this display does not ap-
pear, and steps 5 and 6 of this procedure are not
necessary (so you should skip directly to step 7).
5. Move the highlighting to specify whether you want to use the recalled text as new data
(NEW) or in combination with existing data (COMBINE).
• If you select NEW, the recalled data replaces any text that was on the data input
screen when you pressed SET.
• If you select COMBINE, the recalled data is inserted into the text on the input display.
6. Press SET to recall the text from memory.
• If you selected NEW in step 5, the procedure ends
here. If you selected COMBINE, continue with the
following.
7. Use H and J to move the cursor to the location where you want the recalled text to be
inserted.
8. Press SET to recall the text and insert it at the cursor position.

Deleting Text

Use the following procedure to delete text from memory.
FUNC
STORE
SHIFT
RECALL
CODE
VERT
DELETE
MIROR
OVER
CAPS
Yes SET No ESC
FUNC
CALL
SHIFT
13 4cm
CODE
VERT
ABXYZ
MIROR
OVER
Yes SET No ESC
FUNC
NEW
SHIFT
CODE
VERT
COMBINE
MIROR
OVER
CAPS
Yes SET No ESC
FUNC
WHERE?
SHIFT
CODE
VERT
Eric
MIROR
OVER
Yes SET No ESC
A
A
A
1
A A
A
A
SANS-SERIF
MANUAL FEED
6mm
A
A
A
A A
A
A
SANS-SERIF
MANUAL FEED
6mm
63