Table of Contents
Advertisement
2. Press PRESETS.
3. Use K and L to move the highlighting to NUMBER,
and then press SET.
4. Use H and J to move the cursor to the start point,
and then press SET.
• After you highlight the number, you can increase it
by pressing K or decrease it by pressing L.
• You can only highlight numbers. You cannot high-
light alpha characters.
5. Use H and J to move the cursor to the end point,
and then press SET.
6. Press PRINT to start the print operation.
7. Cut the tape and then press PRINT to print the next label.
• The number is automatically increased with each printing operation you perform.
8. Repeat step 6 as many times as necessary.
• You can abort the number printing operation at any time by pressing ESC.
FUNC
LAYOUT
SHIFT
PHRASES
CODE
VERT
NUMBER
MIROR
OVER
CAPS
Yes
SET
No
ESC
FUNC
FROM?
SHIFT
CODE
VERT
R 111
MIROR
OVER
Yes
SET
No
ESC
FUNC
NUMBER
SHIFT
PRINT?
CODE
VERT
ER
111
MIROR
OVER
CAPS
Yes
SET
No
ESC
A
A
A
A A
A
A
SANS-SERIF
MANUAL FEED
6mm
A
A A
A
A
SANS-SERIF
MANUAL FEED
6mm
57
- Quick Links:
- Changing Character Size
Hide quick links:
Advertisement
Table of Contents
