Setting A High Postage Value - FP optimail Operator's Manual

28
optimail Operator Manual
8.3

Setting a high postage value

The new time and the clock symbol appear in the
display .
The postage value reappears in the display after
about 2 seconds.
The optimail will not accept incorrect time inputs.
The time last set is retained.
If the built-in clock stops, your optimail indicates this
by repeated "beeping and flashing" of the date
symbol "DATE" when switching on. Franking is not
possible in this state. In this case, please reset the
date and time (
not work or this problem occurs repeatedly, please
contact Service.
The "High postage value" function indicates when
the postage value exceeds the set limit. The "High
postage value" is set to 1.08 £ at the factory.
•
Type the desired "High postage value" (in the
example: 108 for a limit of 1.08 £).
•
Press the key. The value disappears from the
display.
•
Press the key.
The new limit is stored. The postage value display
reappears.
You can have the set "high postage value" displayed
(register 5): To do this, press the keys
one after another.
Chapter 8.1 and 8.2). If this does
and