Setting The Postage Value - FP optimail Operator's Manual

12
optimail Operator Manual
4.1

Setting the postage value

•
Type the desired postage value in pence with the
numeric keys.
You can check the entered number sequence in the
display.
•
Confirm with the
The display shows the set postage value with
decimal point.
Message "High postage value"
If an acoustic signals sounds and "HP" and the
postage value flash in the display after confirming
the postage value, the "High postage value" is
exceeded. In this way the optimail helps you to avoid
overfranking and loss of postage.
If you want to frank with the set postage value ...
•
Confirm the displayed postage value with the
key again.
If you have accidentally set too high a postage
value ...
•
Type a new postage value.
•
Confirm with the
Read Chapter 8.3 to find out how to change the limit
for the "High postage value" message.
key.
key.