FP optimail Operator's Manual page 26

26
optimail Operator Manual
Abort TELESET
You can abort the procedure as long as the
connection to the TELESET data centre has not yet
been established. To do so:
During entry of the amount (Position "1")
•
Press the key.
The amount is cleared from the display. You can
enter a new amount and continue the postage call
or exit the postage call mode with the
During connection setup (Position "3")
•
Press the key.
The optimail aborts postage call. The display shows
the postage value again.
Technical note: Please do not use telephones
connected to the same telephone socket (431a)
during postage loading if possible. Unnecessary
charges may be incurred when you lift and do not
replace the telephone handset during the loading
process. The modem cannot terminate the charged
connection.
Call our hotline if you still have any problems.
For TELESET questions:
09063650805
For other technical questions:
01322 405500
or
email to enquiries@fpmailing.co.uk
key.