Introduction - Mitel CPDM3 Installation Manual

Installation Guide

1. INTRODUCTION

The CPDM3 is used for messaging, alarm handling, administration and device
management. It can be used independently but also works in combination with other
CPDM3s or systems.
The software of CPDM3 is pre-installed on a hardware equipped with:
• 2 LAN connections
• 2 USB 2.0 ports for communication with external devices
• 1 Mini-USB port for easy management
• 2 galvanically isolated physical inputs and outputs. The inputs can be used for
trigger conditions which in turn can use the outputs for actions.
• 1 error relay output used for fault actions and error indications
• A-bus connections to Ascom paging system and RS-232 communication with
external systems.
Supply voltage:
Current consumption
Delivery includes:
34/1531-ANF901 43 B1 2016-03-31
100 – 240 Vac ±20%
12 – 24 Vdc -25% / +20%
Max 275 mA at 100 Vac input
Max 1 A at 12 Vdc input
Max 500 mA at 24 Vdc input

Hardware with pre-installed CPDM3 software
Getting started document:
ELISE3- EMBEDDED LINUX SERVER INCLUDING
SAFETY INFORMATION
Two assembly brackets
Four screws size 3.5×40 mm (0.14×1.6 in) together with
four wall plugs
Four MFT screws size M3×6 mm (0.12×0.24 in) for
fastening the assembly brackets
Power cable
TD
2