Setting The Ldap Port Number; Enabling/Disabling Ssl; Setting The Search Base - Konica Minolta bizhub 225i User Manual

3
3.7.2

Setting the LDAP port number

1
Use the +/, key to select [LDAP PORT NO.], then press the OK key.
2
Enter the port number.
% For the port number, you can specify a value between 1 and 65535. Normally, use port number 389.
When you are enabling SSL, use port number 636.
3
Press the OK key.
[ACCEPTED] appears, and the screen returns to the LDAP Setting screen.
3.7.3

Enabling/disabling SSL

1
Use the +/, key to select [SSL SETTING], then press the OK key.
2
Use the +/, key to select [DISABLE] or [ENABLE], then press the OK key.
Whichever of [DISABLE] or [ENABLE] is selected, [ACCEPTED] appears and the screen returns to the
LDAP Setting screen.
3.7.4

Setting the search base

1
Use the +/, key to select [SEARCH BASE], then press the OK key.
2
Enter the name of the database to search for the LDAP server.
% You can enter up to 64 characters for the search base.
3
Press the OK key.
[ACCEPTED] appears, and the screen returns to the LDAP Setting screen.
3-28
LDAP PORT NO.
SEARCH BASE
LDAP Setting 3.7
bizhub 225i