Configuring Ipv6; Automatically Obtaining The Ipv6 Address - Konica Minolta bizhub 225i User Manual

3
11
On the Control Panel, press the Reset key.
% When the following screen appears, turn the power on and off to restart the machine in order to en-
able the settings.
3.4.2

Configuring IPv6

1
Use the +/, key to select [IPv6], then press the OK key.
2
Use the +/, key to select [DISABLE/ENABLE], then press the OK key.
3
Use the +/, key to select [DISABLE] or [ENABLE], then press the OK key.
If [DISABLE] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.
% IPv6 is now disabled and so no settings appear subsequently. Select [RETURN] and press the OK
key to return to the Network Settings screen. If [ENABLE] is selected, [ACCEPTED] appears and the
screen returns to the IPv6 Settings screen.
% Proceed with configuration of the remaining settings for IPv6.
Tips
If you have selected [ENABLE], configure the following settings as needed.
-
AUTO SETTING (page 3-12)
- LINK LOCAL (page 3-13)
- GLOBAL ADDRESS (page 3-13)
- PREFIXED LENGTH (page 3-13)
- GATEWAY ADDRESS (page 3-14)

Automatically obtaining the IPv6 address

1
Use the +/, key to select [AUTO SETTING], then press the OK key.
2
Use the +/, key to select [OFF] or [ON], then press the OK key.
If [OFF] is selected, [ACCEPTED] appears and the screen returns to the IPv6 Settings screen.
% As the IPv6 address is not automatically obtained, you need to configure the remaining settings
manually.
If [ON] is selected, the screen returns to the IPv6 Settings screen.
3-12
CAUTION
PLEASE RE-START
POWER SUPPLY OFF/ON
Network Settings 3.4
bizhub 225i