4
When [E-mail] or [LDAP Search] is selected
Item
[Destination Name]
[Destination Address]
[Basic Mode/Advanced Mode]
[Max TX Size]
[Max Resolution]
[Coding Mode]
Tips
-
The item with "*1" is available only for models in which the FAX Kit FK-510 is installed.
-
The setting of the item with "*1" is available only if the data is sent according to the transmission pro-
cedure of Internet fax. The setting is not enabled if the data is sent according to the transmission pro-
cedure of Scan to E-mail. For details on the Internet fax, refer to [User's Guide Fax].
When [Group Dial] is selected:
You can register a group dial using the same procedure as [Group Dial Setting] in the [Address] tab. For de-
tails, refer to page 4-28.
4-24
Description
Enter a destination name (using up to 20 characters). This is the
name to be displayed on the Control Panel. If the address is se-
lected using [LDAP Search], the item is already entered.
Enter the E-mail address of the destination (using up to 64 charac-
ters). If the address is selected using [LDAP Search], the item is al-
ready entered.
*1
Specify the mail mode (basic mode, advanced mode) used for
sending an Internet fax.
*1
Specify the upper limit of transmission size for sending in the ad-
vanced mode.
*1
Specify the upper limit of transmission image quality for sending in
the advanced mode.
*1
Specify the upper limit of compression coding system for sending
scan data in the advanced mode.
Administrator mode
bizhub 225i
4.3