Setting The Gateway Address; Configuring Dns - Konica Minolta bizhub 225i User Manual

3

Setting the gateway address

1
Use the +/, key to select [GATEWAY ADDRESS], then press the OK key.
2
Enter the gateway address using the keypad, then press the OK key.
[ACCEPTED] appears, and the screen returns to the IPv6 Settings screen.
Tips
-
If the address entered is shorter than 39 characters, it is assumed that "0" is omitted.
-
You cannot specify any address starting with "FF".
3.4.3

Configuring DNS

1
Use the +/, key to select [DNS CONFIG.], then press the OK key.
2
Use the +/, key to select [DISABLE] or [ENABLE], then press the OK key.
% If [DISABLE] is selected, [ACCEPTED] appears and the screen returns to the Network Settings
screen.
% If [ENABLE] is selected, the screen for entering the DNS server's IP address appears. Go to Step 3.
3
Enter the IP address of the DNS server using the keypad.
4
Press the OK key.
[ACCEPTED] appears, and the screen returns to the Network Settings screen.
5
On the Control Panel, press the Reset key.
% When the following screen appears, turn the power on and off to restart the machine in order to en-
able the settings.
3-14
GATEWAY ADDRESS
DNS CONFIG.
CAUTION
PLEASE RE-START
POWER SUPPLY OFF/ON
Network Settings 3.4
bizhub 225i