9-4.
Laser Emission Area
(1)
Main scanning direction
• The print start position is determined by the main scanning print start signal (/HSYNC)
output from the Controller/Mechanical Control Board and the width of the paper.
• The laser emission area is determined by the paper size.
(2)
Sub-scanning direction
• The print start position is determined by the sub-scanning print start signal (/TOD) output
from the Controller/Mechanical Control Board and the length of the paper.
• The laser emission area is determined by the paper size.
/HSYNC
/VIDEO
M-21
/TOD
/VIDEO
4980M016AB